Zhongdi ZD-8906N 25W/30W Solder 550℃ Superiro Heating Performance LCD Ubushushu Bokubonisa Intsimbi yokuSoda

Inkcazelo emfutshane:

Umzekelo: ZD-8906N

•Isifudumezi: Ceramic, 160° C – 480°C (25W), 160°C – 520°C (30W)
•Cofa iqhosha phezulu/ezantsi ukulungiselela ukusetwa kobushushu ngomboniso we-LCD.
•Ukusebenza okuphezulu kokufudumeza ngeceramic ephuculweyo yokufudumeza into, ingcono kakhulu kunezifudumezi zemveli.
• Ukufudumala ngokukhawuleza kwaye ugcine indawo ehleliweyo ngokuchanekileyo.
•Kubandakanya isinyithi esine-soldering kunye ne-rubber grip, isipontshi kunye nedrowa yeengcebiso ezisecaleni.
•Ngencam etsolo esele ixhonyiwe.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimbonakalo:

Iinkcukacha

Ikhowudi	I-Voltage	Amandla	Intsimbi esecaleni	Isifudumezi esisecaleni	Ingcebiso
89-060A	110-130V	25W	ZD-417C	78-417C	N9 umgangatho ophezulu
89-060B	220-240V	25W		78-417D
89-0607	110-130V	30W		78-417C
89-0608	220-240V	30W		78-417D

8906 (1) 8906 (2)

Ukusebenza

• Khupha isikhululo sokuthengisela kwaye ujonge zonke iindawo.Amalungu awonakeleyo kufuneka angasetyenziswa.
•Fakela iqonga lentsimbi kwaye umanzise isipontshi sokucoca ngamanzi.
•Faka iayini yokujongisa kwisitendi.
•Beka isitishi sokudambisa kwindawo eqinileyo neyomileyo
•Fakela isikhululo sokuthengisela kwaye usilayite (I=ON/0=OFF).Isikrini se-LCD siya kubonisa ubushushu obusetiyo obuyi-300℃.
•Uze ucinezele iqhosha elithi “+” okanye “-” ukulungisa ubushushu.Umshicileli ngamnye uya kuba ngu +/- 10℃.Intsimbi ye-soldering iya kufikelela kwiqondo lokushisa lakho kwimizuzu eyi-10.
•Vavanya ubushushu ngokubamba incam yentsimbi ngesolder.Ukuba i-solder iyancibilika ngokulula, ungaqala ukudibanisa.
•Tink incam yentsimbi eshushu ngesolder;sula i-solder egqithisileyo ngesipontshi sokucoca esimanzi.
•Fudumeza indawo yokujongisa ngeayini uze wongeze i-solder.
•Linda ide iphole isolder.
•Coca incam ngesiponji esimanzi emva kokusoda ngakunye.
•Emva kokuba ugqibile umsebenzi, buyisela iayini yokujongisa kwistandi ukuze iphole kwaye ucime isitishi sokusoda.
•Ukufumana iingcebiso ezinkulu zokubethela, nyusa ukuya kwisetingi zobushushu obuphezulu ukwenza ngcono ukusoda.
• Yehlisa iqondo lobushushu ngexesha lekhefu, okokonga amandla kwaye kwandise ubomi bencam ye-soldering.
• Musa ukufaka ifayile kwincam yesolder, okanye iya konakala.
• Soloko ubeka iayini yokudambisa xa ifudunyezwa okanye ngexesha lekhefu.
•Sebenzisa kuphela i-solder kwizinto zombane.I-Acidic solder inokonakalisa i-tip okanye i-workpiece.